Daily maintenance of hydraulic drive centrifuge
- Categories:Hydraulic drive centrifuge
- Author:
- Origin:
- Time of issue:2022-04-21
- Views:0
(Summary description)The hydraulic drive centrifuge must be operated in strict accordance with the operating instructions. Before and after each use, the inside and outside of the instrument must be kept dry and hygienic;
Daily maintenance of hydraulic drive centrifuge
(Summary description)The hydraulic drive centrifuge must be operated in strict accordance with the operating instructions. Before and after each use, the inside and outside of the instrument must be kept dry and hygienic;
- Categories:Hydraulic drive centrifuge
- Author:
- Origin:
- Time of issue:2022-04-21
- Views:0
1. The hydraulic drive centrifuge must be operated in strict accordance with the operating instructions. Before and after each use, the inside and outside of the instrument must be kept dry and hygienic; the centrifuge should be refrigerated during operation, because the moisture in the air will form frost in the centrifugal chamber, and the frost will turn into water after shutdown. . Most foreign low-speed large-capacity centrifuges do not have drainage holes, and the water in the centrifuge chamber accumulates more and more. At this time, the user should remove the rotor by himself and clean up the accumulated water. When reinstalling the rotor, be sure to install it to avoid accidents.
2. After the hydraulic centrifuge is used, clean the centrifugal chamber with neutral detergent in time and dry it with a soft cloth. It is not allowed to wipe the rotor with non-neutral detergent to prevent chemical corrosion of the inner chamber.
3. If it is not used for a long time, clean the centrifuge chamber, and at the same time prevent detergent and water from being drenched in the centrifuge chamber, to prevent the centrifuge motor from rusting and reducing its service life, open the door cover to dry.
4. The hydraulic drive centrifuge should be stored indoors, the ground should be flat, the air should be free of conductive dust, no corrosive or insulating gas, and there is no other strong vibration source nearby, and the place should have ventilation and drainage equipment to improve the overall performance machine life.
Scan the QR code to read on your phone
Recommended news
Online message
Link
Contact us
Address: Hengdong Road, Hejian City
Tel: 18713699661
Mobile phone: 13131777559 13127378823
Copyright © 2021 Brief introduction of Hejian Huidong drilling and production parts Co., Ltd 冀ICP备19028853号-1 Powered by www.300.cn