搜索
language
中国
韩国
韩国
韩国
韩国
韩国
News
Current location:
Homepage
-
-
-
Float casing collar basic introduction

Float casing collar basic introduction

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-01
  • Views:0

(Summary description)The structure of the Float casing collar is basically the same as that of the floating shoe, except that the lower end is a male buckle, which is connected to the casing.

Float casing collar basic introduction

(Summary description)The structure of the Float casing collar is basically the same as that of the floating shoe, except that the lower end is a male buckle, which is connected to the casing.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-01
  • Views:0
Information

The Float casing collar is mainly used to guide the casing string into the well, adjust the buoyancy of the casing string when running the casing, and accurately control the height of the cement plug in the casing during cementing, so as to ensure the cementing quality.

Float casing collar factory

The structure of the Float casing collar is basically the same as that of the floating shoe, except that the lower end is a male buckle, which is connected to the casing. There is an anti-rotation plum blossom hole on the upper end of the filling cement, which is coupled with the front end of the rubber stopper to prevent the rubber stopper from rotating when the rubber stopper is drilled with a PDC drill.
The body of the floating shoe is made of alloy structural steel, the upper end is connected with the casing, and the lower end is a hemispherical cement head to guide the casing to go down. It is equipped with a back pressure valve inside, and the back pressure valve and the body are filled with oil well cement. The back pressure valve can be drilled with a PDC drill. The upper and lower passages of the valve are open at the factory. When the casing is first laid, the liquid in the well has no resistance to the floating shoe. The pressure of the circulating mud pushes the valve head down by a displacement, and the three flaps at the end of the valve stem automatically fall off. After the pump is stopped, the valve presses the valve seat upward under the action of the spring, which acts as a one-way valve. At this time, drilling fluid or cement slurry can be pumped from top to bottom, but the liquid in the casing under the valve or in the annular space outside the casing cannot be returned to the rubber plug. Pressure and other functions, divided into upper plug and lower plug, the main feature is that the PDC bit can be drilled.

Keyword:

Scan the QR code to read on your phone

Relevant information

Recommended news

Online message

Username used for comment:
Message
Description:
wander

Contact us

Address: Hengdong Road, Hejian City

Mobile phone: 13131777559   13127378823

Online customer service
Service time:
9:30 - 18:00
Customer service group:
在线客服
WhatsApp:
WhatsApp:

Copyright © 2021 Brief introduction of Hejian Huidong drilling and production parts Co., Ltd       冀ICP备19028853号-1     Powered by www.300.cn

Message
code