搜索
language
中国
韩国
韩国
韩国
韩国
韩国
News
Current location:
Homepage
-
-
-
Maintenance of negative pressure vibrating screen

Maintenance of negative pressure vibrating screen

(Summary description)The daily maintenance includes the surface of the sieve, especially the tightening of the sieve surface, which should be tightened in time when it is loose;

Maintenance of negative pressure vibrating screen

(Summary description)The daily maintenance includes the surface of the sieve, especially the tightening of the sieve surface, which should be tightened in time when it is loose;

Information

The daily maintenance includes the surface of the sieve, especially the tightening of the sieve surface, which should be tightened in time when it is loose; the surface of the sieve should be cleaned regularly. Coat with industrial petroleum jelly to prevent rust.

Negative-pressure vibration sieve Wholesale Price

Check whether the vibration exciter has irregular noise; check whether the temperature rise of the vibration exciter exceeds 40°C; check whether the protective cover is in good condition; check whether the high quality is lubricated and whether the oil level is sealed; check whether the mounting bolts of the vibration exciter are loose.

Check whether the bolts of the side plates, beams, and excitation beams are loose, check whether the mechanisms of the side plates, beams, excitation beams, rear plates, and sieve plate trailers are broken or damaged; check the clogging of the sieve plate; check the sieve plate looseness and damage.

Shock-absorbing spring, check whether the spring is rusted, deformed, and fail to crack; check whether the temperature rise of the bearing exceeds 40°C for the transmission shaft; check whether the bolts of each part of the transmission shaft are loose; check whether the structure of each part of the transmission shaft is cracked or damaged.

V-belt Check the V-belt for tension and wear; check the wear of the pulley.

Protective cover and pulley Check whether the protective cover is damaged, deformed or loose.

Repair the problems found in the regular inspection of the screen, including adjusting the tension of the V-belt, replacing the new belt, worn screen surface and longitudinal spacers, damping springs, rolling bearings, damaged bolts, repairing damaged screen frame components, etc.

Maintenance precautions: The exciter and transmission device should be disassembled by experienced technicians; the parts should be kept clean before assembly; the new screen should be re-tensioned every 4-8 hours until it is fully tensioned.

Keyword:

Scan the QR code to read on your phone

Relevant information

Recommended news

Online message

Username used for comment:
Message
Description:
wander

Contact us

Address: Hengdong Road, Hejian City

Mobile phone: 13131777559   13127378823

Online customer service
Service time:
9:30 - 18:00
Customer service group:
在线客服
WhatsApp:
WhatsApp:

Copyright © 2021 Brief introduction of Hejian Huidong drilling and production parts Co., Ltd       冀ICP备19028853号-1     Powered by www.300.cn

Message
code