Matters needing attention in the use of hydraulic centrifuges
- Categories:Hydraulic drive centrifuge
- Author:
- Origin:
- Time of issue:2022-04-20
- Views:0
(Summary description)In many industrial production, small and medium-sized hydraulic centrifuges obviously cannot meet the production needs, so large-scale hydraulic centrifuges appear.
Matters needing attention in the use of hydraulic centrifuges
(Summary description)In many industrial production, small and medium-sized hydraulic centrifuges obviously cannot meet the production needs, so large-scale hydraulic centrifuges appear.
- Categories:Hydraulic drive centrifuge
- Author:
- Origin:
- Time of issue:2022-04-20
- Views:0
In many industrial production, small and medium-sized hydraulic centrifuges obviously cannot meet the production needs, so large-scale hydraulic centrifuges appear. The precautions for large-scale hydraulic centrifuges in use are as follows:
1. When the hydraulic centrifuge is in the pre-cooling state, the cover must be closed. After the centrifugal production operation, it must be cleaned in time, the liquid in the cavity should be wiped dry, and then the cover should be opened and ventilated.
2. During the operation, the operator is not allowed to leave the workshop. If an abnormal situation occurs, the operator needs to turn off the power in time and record the relevant abnormal situation to ensure that the equipment can be repaired in a timely and accurate manner after it stops running.
3. Be sure to check the relevant parts during operation to see if they are tightened. Only after confirmation can start the centrifuge and start the centrifuge to work.
4. The rotor of the hydraulic centrifuge should be placed on the workbench when it is not in use. It must be placed inside the machine without tightening it. Otherwise, once it is started by mistake, the rotor will fly out and cause a major accident.
5. After the centrifuge is started, it reaches a certain speed and feeds. Do not feed when the centrifuge is not started or the speed does not reach a certain value, which will affect the service life of the centrifuge and affect the centrifugal effect.
The above are the problems that should be paid attention to during the use of the hydraulic centrifuge. If there is a fault, remember to ask the after-sales personnel to repair it in time. Do not disassemble and assemble it at will, so as not to damage the machine.
Scan the QR code to read on your phone
Recommended news
Online message
Link
Contact us
Address: Hengdong Road, Hejian City
Tel: 18713699661
Mobile phone: 13131777559 13127378823
Copyright © 2021 Brief introduction of Hejian Huidong drilling and production parts Co., Ltd 冀ICP备19028853号-1 Powered by www.300.cn