In order to ensure the safety of the hydraulic driven centrifuge, please pay attention to the following safety precautions:
1. The hydraulic drive centrifuge should be unpacked and inspected before installation to check whether the centrifuge has any defects that affect safety, such as loosening, deformation, cracks, and damage caused by hoisting and transportation.

2. The installation of hydraulic driven centrifuges must strictly abide by the safety operation rules of transportation, hoisting, electric welding, electrician, fitter, etc. to avoid accidents.
3. The installation foundation of the hydraulically driven centrifuge should be firm and level. The centrifuge installation and pipeline connection should be correct and stable. The anchor bolts should be firmly fixed. When the centrifuge is hoisted and installed separately, the assembly should be accurate and the connection should be firm.
4. The main engine of the hydraulically driven centrifuge and its electric control cabinet must be reliably grounded.
5. Do not dismantle the centrifuge’s safety shield, pressure limiting, safety alarm and other protective devices at will. Once the safety protective device is damaged or fails, it should be repaired in time. Do not dismantle, change parts or add accessories at will to ensure the centrifuge’s safety. completeness.
6. Do not increase the running speed of the centrifuge at will (the maximum speed limit is subject to the provisions of this manual) to avoid the centrifuge running at overspeed.
7. Do not arbitrarily increase the limit pressure of the centrifuge hydraulic system (the maximum limit pressure is subject to the provisions of this manual), so as to avoid the centrifuge running at overpressure.
8. Do not arbitrarily change the intended use of the hydraulically driven centrifuge to avoid adverse changes in material density, corrosive medium, working conditions, etc., which will affect the safety of the centrifuge.
9. Personnel who have received technical training for the centrifuge should be selected as their safety management personnel.
10. Personnel who have received the technical training of the centrifuge and have been fully educated on the safety operation procedures and safety precautions of the centrifuge should be designated to operate and maintain the centrifuge.
11. Operators should be proficient in the operating procedures of the centrifuge, such as driving, parking and emergency parking, and should strictly abide by its safety operating procedures, and must not operate savagely.
12. It is not allowed to put the head and hand into the machine or use a shovel to scrape the material under the operation of the hydraulically driven centrifuge drum.
13. It is not allowed to adjust, maintain and troubleshoot the centrifuge under the operation of the hydraulically driven centrifuge. When adjusting, maintaining or troubleshooting, take necessary safety precautions.