What are the cementing plugs
- Categories:Anti-rotation cementing plug
- Author:
- Origin:
- Time of issue:2022-08-03
- Views:0
(Summary description)The bottom plug (red) is used to isolate the cement slurry and the pre-fluid to prevent the forward cement slurry from being polluted before the casing floating hoop.
What are the cementing plugs
(Summary description)The bottom plug (red) is used to isolate the cement slurry and the pre-fluid to prevent the forward cement slurry from being polluted before the casing floating hoop.
- Categories:Anti-rotation cementing plug
- Author:
- Origin:
- Time of issue:2022-08-03
- Views:0
1. Casing rubber stopper
The casing rubber plug is mainly used for casing cementing on the jack-up platform and the jacket. The bottom plug (red) is used to isolate the cement slurry and the pre-fluid to prevent the forward cement slurry from being polluted before the casing floating hoop. The top plug (yellow) is used to separate the displacement fluid from the cement slurry to prevent the subsequent cement slurry from being polluted by the displacement fluid. At the same time, the top plug is also used to touch the pressure to indicate the end of cementing and replacing the slurry.
2. Tail pipe rubber plug group
The tail pipe rubber plug is connected to the coupling at the lower end of the center pipe of the tail pipe feeding tool. The drill pipe rubber plug is put through the tail pipe cement head, scraped off the cement slurry in the drill pipe and compounded with the tail pipe rubber plug, and then sheared. Release the tailpipe rubber stopper. The rubber plug of the tail pipe goes down to replace the cement slurry until it touches the ball seat.
Scan the QR code to read on your phone
Recommended news
Online message
Link
Contact us
Address: Hengdong Road, Hejian City
Tel: 18713699661
Mobile phone: 13131777559 13127378823
Copyright © 2021 Brief introduction of Hejian Huidong drilling and production parts Co., Ltd 冀ICP备19028853号-1 Powered by www.300.cn