language
中国
韩国
韩国
韩国
韩国
韩国
1/1
Number of views:
0
Jet mixer
Retail price
0.0
元
Market price
0.0
元
Number of views:
0
Product serial number
Product order
Tel: 0086-13127378823
Mailbox: sale@oil-tools.com.cn
Category
Oil drilling equipment
Quantity
-
+
Stock:
0
Product introduction
The jet mixer is mainly composed of a nozzle, a mixing chamber, a venturi tube, a feeding funnel and a butterfly valve. The utility model has the advantages of low cost and convenient installation and use.
|
Model |
HHQ/P 125x150 |
HHQ/P 150x150 |
|
Discharge capacity m³/h |
180 |
240 |
|
Lift, m |
Higher than 2.3 |
Higher than 2.3 |
|
Equipped power, kW |
45-55 |
55-75 |
|
Incoming/discharge port diameter, mm |
125/150 |
150/150 |
|
Mass, kg |
200 |
210 |
|
Overall dimensions (length*width*height), mm |
1265x660x985 |
1265x660x985 |
Previous
Swirl mixer
Next
Compound mixer
Related products
-
Compound mixerA premixed wetting chamber is installed between the funnel and the ejector in the compound swirl mixer, guiding partial slurry to enter and rotate in the premixed wetting chamber to form vortex flow. The reagent first enters the premixed wetting chamber to mix with the liquid, and then enters the ejector to further mix with the liquid from the nozzle to achieve the purpose of full mixing. -
AgitatorThe plane enveloping worm gear reducer has the advantages of reliable performance, small structure size, light weight, stable transmission, low noise, large transmission power and strong mixing ability.
-
Shear pumpThe JQ6 5J-10 shear pump has the main structure that is basically the same as that of the sand pump, and is equipped with extremely reliable mechanical seals. The pump is equipped internally a with stainless steel turbine (composed of a guide vane, an impeller, a nozzle and a collection chamber), a shear plate and an auxiliary impeller to shear the polymer and bentonite in drilling fluid.
-
Sand pumpThere are 5 series in SB sand pumps, i.e. SB8×6, SB6×5, SB5×4, Sb4×3 and SB3×2. The thickness of the pump shell is increased by 30%, enhancing the erosion margin and pressure bearing capacity. The size of impeller outlet is widened, and the velocity of impeller outlet is reduced, so as to eliminate the abrasive jet effects that tend to be caused by narrow impellers and decrease both turbulence and abrasion. For mechanical sealing, single-sided sealing mode is adopted; the sealing surface material of either dynamic or static ring is hard metal, providing high abrasion resistance.
-
Desilting cleanerThe XQJS100*10-G desilting cleaner can separate 15μm-44μm solid phase particles. The cone is made of medium manganese ductile iron with good abrasion resistance, and easy to replace. The modular design is applied, and the structure of the screen box and base is the same as that of sand cleaner.
-
LW355×1250Y-N Hydraulic drive centrifugeFor the hydraulic drive centrifuge, an advanced hydraulic control technology is adopted. Hydraulic pumps and motors are used to realize stepless speed regulation, providing the advantages of stable performance and smooth speed regulation. It can effectively remove 2μm-10μm harmful solid, and suitable for drilling fluid treatment, drilling waste treatment, etc.
-
Desanding cleanerThe XQJS300×2-WG desanding cleaner can separate 44μm-74μm solid phase particles. The cone is made of medium manganese ductile iron with good abrasion resistance, and easy to replace. The modular design is applied, and the structure of the screen box and base is the same as that of silt cleaner.
-
Drilling fluid cleanerDrilling fluid cleaner is a trinity machine integrating the functions of a desander, a mud remover and a vibration sieve. It combines two-stage purification on a vibrating screen to effectively treat all drilling fluid. It is very suitable for the treatment of heavy weight drilling fluid, recovery of expensive barite and drilling fluid, and removal of excess harmful solid from the wellhead.
-
CCQ300 atmospheric degasserThe CCQ300 atmospheric degasser has a large capacity, up to 300m3/h. It has compact structure, small installation area and low power consumption. Thus, it is very suitable for drilling platforms, modular drilling rigs and other places with limited installation locations.
Online message
Message
Description:
Contact us
Address: Hengdong Road, Hejian City
Tel: 18713699661
Mobile phone: 13131777559 13127378823
Online customer service
微信号:123123123
手机扫一扫联系我们
手机扫一扫加入我们
Customer service hotline
Copyright © 2021 Brief introduction of Hejian Huidong drilling and production parts Co., Ltd 冀ICP备19028853号-1 Powered by www.300.cn
sale@oil-tools.cn
0086-13127378823
联系我们
