Sand pump
Product order
Tel: 0086-13127378823
Mailbox: sale@oil-tools.com.cn
There are 5 series in SB sand pumps, i.e. SB8×6, SB6×5, SB5×4, Sb4×3 and SB3×2. The thickness of the pump shell is increased by 30%, enhancing the erosion margin and pressure bearing capacity. The size of impeller outlet is widened, and the velocity of impeller outlet is reduced, so as to eliminate the abrasive jet effects that tend to be caused by narrow impellers and decrease both turbulence and abrasion. For mechanical sealing, single-sided sealing mode is adopted; the sealing surface material of either dynamic or static ring is hard metal, providing high abrasion resistance.
|
Model |
Flow rate, m³/h |
Lift, m |
Efficiency, % |
Motor power (recommended), kW |
Overall dimensions (length*width*height), mm |
Mass, kg |
|
SB8×6J-13 |
240 |
37 |
65 |
75 |
1983×695×1020 |
1125 |
|
SB8×6J-12 1/2 |
240 |
35 |
63 |
75 |
1983×695×1020 |
1124 |
|
SB8×6J-12 |
200 |
33 |
63 |
55 |
1908×667×960 |
991 |
|
SB6×5J-12 |
180 |
31 |
60 |
45 |
1808×555×864 |
786 |
|
SB6×5J-11 1/2 |
150 |
28 |
37 |
1808×565×864 |
758 |
|
|
SB6×5J-11 |
150 |
28 |
30 |
1744×545×838 |
723 |
|
|
SB4×3J-10 |
90 |
25 |
15 |
1574×523×783 |
533 |
|
|
SB4×3J-9 1/2 |
80 |
24 |
15 |
1574×523×783 |
533 |
|
|
SB4×3J-9 |
80 |
23 |
11 |
1534×523×783 |
515 |
Related products
-
Desilting cleanerThe XQJS100*10-G desilting cleaner can separate 15μm-44μm solid phase particles. The cone is made of medium manganese ductile iron with good abrasion resistance, and easy to replace. The modular design is applied, and the structure of the screen box and base is the same as that of sand cleaner. -
LW355×1250Y-N Hydraulic drive centrifugeFor the hydraulic drive centrifuge, an advanced hydraulic control technology is adopted. Hydraulic pumps and motors are used to realize stepless speed regulation, providing the advantages of stable performance and smooth speed regulation. It can effectively remove 2μm-10μm harmful solid, and suitable for drilling fluid treatment, drilling waste treatment, etc.
-
Desanding cleanerThe XQJS300×2-WG desanding cleaner can separate 44μm-74μm solid phase particles. The cone is made of medium manganese ductile iron with good abrasion resistance, and easy to replace. The modular design is applied, and the structure of the screen box and base is the same as that of silt cleaner.
-
Drilling fluid cleanerDrilling fluid cleaner is a trinity machine integrating the functions of a desander, a mud remover and a vibration sieve. It combines two-stage purification on a vibrating screen to effectively treat all drilling fluid. It is very suitable for the treatment of heavy weight drilling fluid, recovery of expensive barite and drilling fluid, and removal of excess harmful solid from the wellhead.
-
CCQ300 atmospheric degasserThe CCQ300 atmospheric degasser has a large capacity, up to 300m3/h. It has compact structure, small installation area and low power consumption. Thus, it is very suitable for drilling platforms, modular drilling rigs and other places with limited installation locations.
-
ZSCQ series vacuum jet degasserThe ZSCQ series vacuum jet degasser is widely used in drilling abroad, which is characterized by two degassing methods, i.e. vacuum degassing and split umbrella blade for gas separation. The umbrella shaped blade has a large area, which can more effectively remove the gas in the mud.
-
ZLCQ vacuum centrifugal degasserThe ZlCQ series vacuum centrifugal degasser is widely used in domestic drilling. When the impeller rotates in the shell, it can not only discharge the liquid, but also stir the liquid to make the gas overflow. It has compact structure and low power consumption.
-
S340BK vibration sieveThe S340bk vibration sieve is of a new type. It adopts four large-area plate and frame screens arranged up and down to realize mud grading filtration and improve the throughput and treatment effects.
-
S340BK vibration sieveIt adopts the principle of double-motor autosynchronized vibration to provide two vibration modes, i.e. elliptic and straight vibration. It controls the motor's rotation direction to switch vibration tracks and amplitudes quickly, and thus can adapt to complex drilling operation conditions. It can improve drilling efficiency, cut the consumption of drilling fluid and maintain low costs.
Online message
Contact us
Address: Hengdong Road, Hejian City
Tel: 18713699661
Mobile phone: 13131777559 13127378823
Copyright © 2021 Brief introduction of Hejian Huidong drilling and production parts Co., Ltd 冀ICP备19028853号-1 Powered by www.300.cn
sale@oil-tools.cn
0086-13127378823
联系我们
